Aluminate is a highly concentrated triple combination acid based detergent and degreaser. It removes scale, lime and soap film as well as grease, oil and processing fluids. Aluminate cleans and brightens stainless steel and aluminum.

Aluminate degreases, removes lime and scale, brightening in one operation. Used by: metal part fabricators, equipment restoration specialists, sewage and water treatment plants, factories, kitchens, food processing plants, and bakeries. Aluminate’s uses are unlimited, making it one of the most versatile detergents available.

Annihilate is an extremely powerful inhibited acid detergent designed for the removal of rust and mill scale from metal surfaces prior to phosphatizing and painting.

Mix 1 part Annihilate to 3 parts water in hand operated power sprayer. Spray surface to be cleaned with a fine to medium mist to evenly wet the entire surface.

On vertical surfaces always start at the bottom with a horizontal movement and work up. Allow product to stay in contact with metal surface for 1 to 2 minutes, accounting for the thickness of the rust or mill scale. Power wash the entire surface with ample amounts of phosphate solution to ensure removal of acidic residues.

FerroPrep is a liquid acid cleaner and rust stripper. It has special solvents and surfactants making it extremely effective for rust, scale or lime removal on ferrous metal surfaces. FerroPrep is especially useful for the removal of welding smut on stainless steel.

FerroPrep can be hand wiped on metal for removal of light rust, heat scale or hard water lime buildup. It imparts a light coating to steel parts prior to finishing operations, increasing paint adhesion. Normal use concentrations range from 1:3 to 1:20 with water. It is effective at room temperature and its activity increases with temperature. Operating temperatures with this product range from 72-160 degrees F.

Ferro-Spray is a low foaming blend of liquid caustics, surfactants and buffering agents. This highly concentrated blend makes Ferro-Spray the spray cleaner of choice for the metal fabricating industry. This product is ideal for cleaning steel or ferrous metal parts in the first stage of a five stage phosphatizing wash system. Ferro-Spray may be used as an engine block or steel parts spray wash in cabinet type washers. Be sure to use a rust inhibitor as it does not have rust inhibition properties. It is safe to use on chrome, nickel and stainless steel, and is biodegradable. Absolutely do not use on aluminum or cuprous metals. Use at 0.5% to 3.0% by volume of water, depending on severity of soils to be cleaned.