Custom blended iron phosphates are used to produce a corrosion resistant, iron phosphate coating on ferrous metals.
This product cleans and coats steel for maximum paint adhesion and corrosion protection and has been laboratory tested and field proven. Because the water quality from area to area varies, we send our customer's water samples for laboratory testing and create a custom blended product that will perform optimally during application.
FERRICOTETM Iron Phosphatizer
Ferricoteliquid iron phosphate is specially formulated for hot water or steam cleaning phosphatizing.It contains detergents that are highly effective in removing heavy, oily type soils, such as welding anti-splatter, drawing oils, etc.Ferricote will clean and produce a corrosion resistant, paint-bonding, iron phosphate coating on ferrous metals.
No pH adjustment is required when used at the recommended concentration and under normal operating conditions.
Ferricote can be used with almost any phosphatizing system.It is a trouble-free product that is safe to use and can be automatically metered into the operation. The most cost effective concentrations are from 1.5% to 3.0% by volume, providing effective cleaning and phosphatizing at a low chemical cost.
ONESTEPTM Neutral pH Metal Cleaner
One Stepis an environmentally safe, neutral pH concentrated detergent suitable for cleaning all types of metal surfaces with no special disposal requirements.It contains a variety of degreasing agents designed to remove dust, glove prints, and other soils found in manufacturing plants. One Stepis a low foaming detergent specifically formulated for cleaning metal parts prior to painting. When properly used, ferrous metals can be washed and dried without flash rust. One Step is suitable for use with metering systems used in high-pressure washers. Contains degreasing agents to remove dust, glove prints, and other soils found in a manufacturing plant.
For best results use in a high pressure hot water system without a rinse. Wash part thoroughly and let dry.